In order to help safeguard life, health and property and to promote the public welfare, the practice of professional engineering, professional land surveying and professional geology in this Commonwealth requires continuing professional competency.
Section 4.5(b) of the Engineer, Land Surveyor and Geologist Registration Law requires that each licensee shall be required to meet the continuing professional competency requirements as a condition for licensure renewal.
Licenses expire September 30 of every odd-numbered year. Section 4.5 of the Engineer, Land Surveyor and Geologist Registration Law requires the completion of at least 24 PDH, as a condition for licensure renewal.
Each licensee shall be required to obtain twenty-four PDH units during the biennial renewal period. If a licensee exceeds the requirement in any renewal period, a maximum of twelve PDH units may be carried forward into the subsequent renewal period.
“Professional development hour” or “PDH” shall mean fifty minutes of instruction or presentation relevant to professional practice or any equivalent.
PDH units may be earned as completion of correspondence, televised, videotaped and other short courses or tutorials relevant to professional practice.
Continuing professional competency obtained by a licensee should maintain, improve or expand skills and knowledge obtained prior to initial licensure, including law and ethics applicable to the profession, or develop new and relevant skills and knowledge. No credit shall be given for a course in practice building or office management.
Mandatory Courses in Your Cart
|Biological Wastewater Treatment Processes I - Activated Sludge||2.00||$38.00|
|Biological Wastewater Treatment Processes II - MBBR Processes||4.00||$76.00|
|Biological Wastewater Treatment Processes III - MBR Processes||2.00||$38.00|
|Flow Measurement in Pipes and Ducts||4.00||$76.00|
|Hydraulic Design of Storm Sewers with Excel||4.00||$76.00|
|Manning Equation Open Channel Flow Calculations||4.00||$76.00|
|Mechanics Lien Part 1 (BSP/GEN)||1.00||$19.00|
|Natural Gas Pipeline Flow Calculations||3.00||$57.00|
|Partially Full Pipe Flow Calculations||3.00||$57.00|
|Passive Solar Heating Basics||4.00||$76.00|
|Pipe Friction Flow Factor Calculations||3.00||$57.00|
|Rational Method Hydrological Calculations||3.00||$57.00|
|Sharp-Crested Weirs For Open Channel Flow Measurement||3.00||$57.00|
|Solar Energy Fundamentals||4.00||$76.00|
|Business Planning for PE - Part I Introduction to Business Planning||1.00||$19.00|
|Business Planning for PE - Part II How to Build a Business Plan||1.00||$19.00|
|Business Planning for PE - Part III How to Implement a Business Plan||1.00||$19.00|
|Business Planning for PE Introduction, Building, and Implementing the Business Plan||4.00||$76.00|
|Building for Energy Efficiency (BSP/T/GEN) (LU/HSW)||1.00||$19.00|
|Daylighting for Energy Efficiency (BSP/T/GEN)||1.00||$19.00|
|Energy Efficient Roofs (GEN) (LU/HSW)||1.00||$19.00|
|Energy Efficient Ventilation Techniques (GEN LU/HSW)||1.00||$19.00|
|Energy Star Qualified New Home (GEN)||1.00||$19.00|
|Green Building Sustainability and Smart Growth (GEN) (LU/HSW)||1.00||$19.00|
|Basic Engineering Ethics 1 Hour||1.00||$19.00|
|Basic Engineering Ethics 3Hrs||3.00||$76.00|
|Basic Engineering Ethics 4Hrs||4.00||$76.00|
|Developing Your Stormwater Prevention Plan (GEN)||2.00||$76.00|
|Home Builder’s Guide to Coastal Construction (GEN)||4.00||$76.00|
|Indoor Environmental Quality (GEN) (LU/HSW)||3.00||$57.00|
|Lead and Other Metals in Construction (WPS/GEN)||3.00||$57.00|
|Mold in Schools & Public Buildings||2.00||$38.00|
|Mold Remediation in Schools and Public Buildings (BSP/GEN)||2.00||$38.00|
|Raising the Roof (GEN) (LU/HSW)||2.00||$38.00|
|The Building Envelope (BSP/GEN)||1.00||$19.00|
|Wind Mitigation Methodology - Retrofits for Existing Homes - 1 hr (WMM/GEN)(LU/HSW)||1.00||$19.00|
|Wind Mitigation Methodology - Retrofits for Existing Homes - 2 hour (WMM/HMM/GEN)||2.00||$38.00|
|Wind Mitigation Methodology - Retrofits for Existing Homes - 3 Hour (WMM/HMM/GEN)||3.00||$57.00|